at home fire hazards

Tangled extension cords? Power strips galore? You home's wiring system might be working overtime with all the new gadgets you currently have – and might be at risk for igniting a fire. Straighten out these wiring problems and more with tips from This Old House.

Have a licensed electrician walk through your home every five years to look at the wire insulation and the service panel and check for any code violations. If you're doing it yourself, start by turning off the circuit at the main breaker panel.

Code requires outlets within 4 feet of a door and every 12 feet after that. Extension cords can be useful, but keep in mind that smaller-gauged cords can overheat and start a fire if overused. Adding more outlets can run about $100 per outlet on first levels and $200 upstairs.

Another fire hazard is overlamping, in which light fixtures have a bulb with higher-than-recommended wattage installed. Check the fixtures' wattage limit or use bulbs that are smaller than 60 watts.

Flickering lights aren't just annoying – they could be a sign of wire trouble, too. The outdoor fitting where overhead cables from the power line come into the house, or frayed wiring in the weather head, causes the short when the cable moves. Call your electric utility company to have any power related lines looked at.

  • May 09 - Fremont
  • 0Yes

  • Report a Problem

    Please enter a valid email address.

    Content flagged

    We will review this content. Thanks for helping make the site more useful to everyone. To learn more, read Zillow's Good Neighbor Policy.

    We're sorry. This service is temporarily unavailable. Please come back later and try again.

Be a Good Neighbor. Be respectful and on-topic. No spam or self-promotion! See our Good Neighbor Policy.