211 E 13th St, Mountain Home, AR 72653

This property is located in Mountain Home, AR.Between South Main St  Building A is 4400 sq ft metal building w/ 12ft sidewalls, serviced by 2-10ftx10ft overhead doors- front and back, w/ 2 bathrooms.Wired-400amp 3 phase and is equipped for metal fabrication     For Machine work building A is equipped w/: Daewoo Puma CNC Lathe, Fadal 4020 CNC Mill, Kuma Howe 4V-NC CNC Mill , LeBlonde Regal Manual Lathe;3-phase 32 inch swing60 inch bed, Manual Mill-Bridgeport;3-phase. For Metal Fabrication- CNC Tracker 5ft x 10ftPlasma Cutting Table; with thermal dynamics TD plasma cutter, (3) MillerCP302;3-phase;with 22A wire feeder, (4) Grizzly Drill Presses;1.5HP 20" swing, (2) Jet drill presses; model#OR-2501, Ellis Miter Band Saw; Model #1800, Brobo Cold Saw; Model #Super300;3-phase, Kalamazoo Cold Saw; 12";Model #perfect 300, ScotchmanIronworker (punch/shear);60 ton; 1-phase;Mod #6509, Foot shear; 52"; 16gauge capability, Hand pan 40", Richards Bender, SpeedAir Compressor-15HP;3-phase, Eagle Bending Machine; model #CP3OR, Airtek AirDryer;1-phase; model#HIT60, belt sander;4"x80'. 6,000 lb Yale Forklift w/ boom.  Building B is 3000 sq ft. total. 750 sq. ft. isa fully equipped office, kitchen/breakroom With central heat and air conditioning. Remaining area is warehouse for finish assembly and inventory of finishedproducts. Building B also comes with a 4,000 lb Allis-Chalmers electric forklift.  These shop buildings are 2 blocks from Industrial Powder Coating who powder coated our products for the last 15 years.  Building C is another metal fabrication area-1900 sq ft. BuildingBAlso included: tooling vices for CNC machines, All jigs, fixtures, drawings, software, intellectual property rights, all dies and molds we own at vendor locations- and extensive inventory of pAdditional property info: http://www.forsalebyowner.com/listing/Commercial-property-for-sale-by-owner-211-E-13th-Street-72653/23959110?provider_id=28079